MDMER: What Canada¡¯s revised mining effluent regulations could mean for your mine
February 24, 2020
Does your metal or diamond mine discharge effluent? If so, you need a plan to comply with the government¡¯s new limits by June 2021.
Heads-up, Canadian mine owners and operators: Make sure you keep your eyes on the calendar. By June 1, 2021, metal and diamond mines need to comply with the revisions to the metal and diamond mining effluent regulations (MDMER), which were released by Canada¡¯s federal government in 2018. These revised guidelines¡ªoriginally known as MMER, or metal mining effluent regulations¡ªwill affect over 100 metal and diamond mines in Canada.
All Canadian metal and diamond mines that discharge effluent¡ªaka liquid waste or sewage discharged by a treatment plant into a river, lake, or the sea¡ªshould already know about these changes. The new effluent limits take effect in less than a year-and-a-half, which may not be much time if mine operators need to make changes¡ªsuch as running assimilative capacity studies to see how their mixing zones might change, performing treatment plant upgrades, and treating for new parameters that were not part of previous regulations (e.g., unionized ammonia).
The federal government¡¯s revised mining guidelines will affect more than 100 metal and diamond mines in Canada.
Canadian mines that fail to meet the new effluent quality standards by June 2021 will be considered non-compliant, leading to fines or other enforcement action.
Here are some key observations that we¡¯ve noted about the revised regulations, focusing primarily on Schedule 4, which looks at authorized limits for deleterious¡ªaka potentially harmful¡ªsubstances.
In the end, the federal government wants to ensure that Canadian mines are more protective of the environment and responsible with effluent discharge.
New limits for unionized ammonia
It¡¯s time to pay attention to unionized ammonia. This nutrient, a byproduct of common blasting explosives and cyanide degradation, has never had a federal effluent limit in Canadian mining. Now, the criteria of 0.5 mg-N/L for unionized ammonia (monthly mean concentration) is considered safe for fish, particularly rainbow trout. ?
If Canadian mines discharge unionized ammonia at a concentration higher than the new limit, mine owners will have to make additions to their treatment systems, which could include adding new filters. These types of changes, considered big investments for most mines, may take a lot of time to design and construct. We estimate that the process could take a year or more depending on the level of existing data.
First, a mine owner needs to hire an environmental consultant to figure out if they have a unionized ammonia problem. If they do, an engineering services firm can design an ammonia treatment system to work with the mine¡¯s existing water-treatment plant. After that, the system needs to be constructed. This isn¡¯t something that can be left until the last minute.
Also note that some effluent parameter limits have been lowered in the MDMER, so it¡¯s important to check your effluent quality against the new limits to ensure your mine will be compliant under the new regulations.
Effluent is liquid waste discharged by a treatment facility, milling facility, pond, or impoundment area.
Existing mines versus new mines
It¡¯s important to mention some differences between existing mines and new mines, especially since the rules are more stringent for new mines.
For existing metal mines, the MDMER revisions create tighter effluent limits for arsenic, lead, and cyanide, as well as the new limits for unionized ammonia mentioned above. For these existing mines, there are no changes to effluent limits for zinc, nickel, or copper.
Conversely, new mines¡ªopening and becoming subject to the MDMER after June 2021¨C may have more work to do. These mines need to pay attention to new limits for arsenic, copper, cyanide, lead, nickel, and zinc, as well as unionized ammonia. This also applies to closed mines that reopen starting in June 2021.
Limits for diamond mines
The change in acronym, from MMER to MDMER, reflects an important addition¡ªdiamond mines. Before this change, diamond mine effluents weren¡¯t regulated on a federal level. Now that diamond mines will become regulated via the Fisheries Act, mine owners need to meet effluent limits.
These owners will likely need to focus on total suspended solids, a main contaminant found in this type of mineral mining. Other MDMER effluent parameters may be important depending on the geochemistry of the host rock. Hopefully, most diamond mines have already paid attention to effluent limits as a best practice, something that would ease the transition to MDMER compliance.
High concentrations of deleterious substances could negatively affect fish, mammals, and water.
Provincial regulations may play a role
Here¡¯s something to keep in mind: all provinces and territories have regulations for metal mines and effluent limits. But how do they compare to the MDMER? In Ontario, regulation 560/94 is like the previous federal rules of the MMER but doesn¡¯t exactly match up with the updated MDMER. So, Ontario mines will likely have to make some changes.
Certain provinces may have criteria that are more stringent than the MDMER. In those cases, mine owners likely won¡¯t feel the effects of the revised MDMER, since they¡¯ll already be compliant. But mine owners in provinces with less stringent effluent regulations will probably have a lot of work to do to comply with the federal updates.
More protective and responsible
In the end, the federal government wants to ensure that Canadian mines are more protective of the environment and responsible with effluent discharge. High concentrations of deleterious substances could negatively affect fish, mammals, and water¡ªeventually affecting our environment, food, and drinking water.
As you make your plan to comply with the revised regulations, look for additional blogs from our team on this topic.?
All Canadian metal mines and diamond mines that discharge effluent should start reassessing their effluent quality if they haven¡¯t yet, because the deadline isn¡¯t far away, and treatment plans might take a while to update. June 2021 will be here before you know it.